Camera Connection and Parameter Tuning Guide
About 453 wordsAbout 2 min
This document is the entry point for connecting cameras and adjusting imaging parameters in PickWiz 1.9.0. Complete the camera power supply, network connection, and hardware installation first, then open the guide for your camera series.
For hardware installation, refer to the DexSense hardware installation manuals. Connection, configuration, accuracy calibration, and parameter tuning in PickWiz are described separately for each camera series.
Hardware Installation Manuals
Before connecting a camera, follow the hardware installation manual for its series to install the camera and connect its power supply and network:
- XEMA Series Camera Hardware Installation Manual
- FINCH Series Camera Hardware Installation Manual
- KINGFISHER Series Camera Hardware Installation Manual
1. Select a Camera Series
1.1 XEMA Camera Parameter Tuning Guide
Covers software connection, camera configuration, accuracy calibration, and imaging parameter adjustment for XEMA cameras.
Open the XEMA Camera Parameter Tuning Guide
1.2 FINCH Camera Parameter Tuning Guide
Covers software connection, camera configuration, accuracy calibration, and imaging parameter adjustment for FINCH cameras.
Open the FINCH Camera Parameter Tuning Guide
1.3 KINGFISHER Camera Parameter Tuning Guide
Covers software connection, camera configuration, accuracy calibration, and imaging parameter adjustment for KINGFISHER cameras. Before connecting a KINGFISHER camera, use this guide to confirm the installation order and connection requirements for MVS and PickWiz.
Open the KINGFISHER Camera Parameter Tuning Guide
2. General Workflow
For any camera series, complete the preparation in the following order:
- Open the “Camera” page in PickWiz, then search for the camera or enter its IP address to connect.
- In “Task Information” for the current Task, select the connected camera and camera configuration.
- Trigger image capture and check the results in the 2D image, Point Cloud, and Depth image.
- Adjust parameters using an editable configuration, capture another image, and confirm the results.
- If necessary, check or calibrate the camera accuracy, then save the final configuration to the current Task.
Refer to the guide for the relevant series for specific buttons, parameter ranges, engine modes, and examples of results. New options in PickWiz 1.9.0, such as AI structured light, will be added after they have been checked against the software interface.
3. Troubleshooting
If the camera cannot connect, image capture fails, or the images are abnormal, first check the camera power supply, network, and IP address. Then refer to Camera Issues and Solutions.