Pick Point Filtering Function Configuration Guide
About 5587 wordsAbout 19 min
Pick point filtering functions remove pick points with insufficient quality, outside safe limits, at risk of occlusion or collision, or duplicated from previous results. This prevents invalid pick points from reaching subsequent sorting and robot execution.
Recommended configuration order
First, use the ROI, pose angle, and coordinate limits to constrain the picking area. Then check for occlusion and gripper collisions. Finally, use matching scores or previous results to filter duplicate pick points. Adjust one filter condition at a time and check how many pick points remain so that overly strict thresholds do not leave the robot with no valid pick points.
Select a pick point filtering function
| Filtering objective | Recommended function | Selection guidance |
|---|---|---|
| Exclude pick points with low matching quality | Filter by fine matching score | Set a minimum retention threshold based on the pose fine matching score. |
| Avoid picking targets on lower layers or behind occlusions | Filter pick points on occluded targets | Detect the point cloud of occluding objects in a specified direction from the pick point. |
| Limit the robot's picking pose angle | Filter by picking pose angle range | Filter pick points whose angle relative to a specified ROI axis exceeds the threshold. |
| Keep pick points within the ROI 3D | Filter pick points outside the ROI 3D region type | Limit the picking range to the workspace or a smaller picking area. |
| Exclude gripper collision risks | Filter pick points with target–gripper collisions | Detect collisions between the gripper model and the scene point cloud near a pick point. |
| Keep only one extreme pose per instance | [Expert] Keep the pick point with the maximum/minimum pose value for each instance and filter the rest | Keep the pose with the maximum or minimum value along a specified coordinate axis. |
| Avoid repeatedly outputting recent pick points | [Expert] Filter pick points similar to the previous N pick points | Compare the current pick point with cached previous pick points. |
| Avoid repeatedly identifying recent target poses | [Expert] Filter target poses similar to the previous N target poses | When a pose is similar, filter all pick points on that target. |
| Limit picking coordinates and pose ranges | [Expert] Filter pick points outside the upper and lower picking coordinate limits | Limit translation and rotation separately around a reference pick point. |
Pick point filtering functions
Related documents
Correct the direction, position, and center of picking poses before or after filtering.
Set the priority and output order of filtered pick points.