Instance Filtering Function Configuration Guide
About 5363 wordsAbout 18 min
Instance filtering follows 2D Instance Segmentation. It removes detection results that do not meet size, shape, class, color, or Point Cloud requirements before instance sorting and 3D processing. This page helps you select functions by the type of abnormality, then explains their parameters and tuning methods in the order they appear in PickWiz.
Where to configure
In visual parameters, go to 2D Recognition > Instance Filtering, add the required functions, and set their parameters. First identify the types of abnormal results you need to remove, then add the corresponding functions.
Select an Instance Filtering Function
Identify the most consistent difference between abnormal and valid instances, then select the corresponding function.
| Type of abnormality | Corresponding functions |
|---|---|
| Abnormal size | Filter by bounding box area, filter by mask area, filter by instance Point Cloud edge length |
| Abnormal shape | Filter by bounding box aspect ratio, filter by mask area to mask enclosing polygon area ratio |
| Incorrect class | Filter instances by class ID, filter by classifier class ID |
| Abnormal color | Filter by three-channel color |
| Low score | Filter by Confidence, filter by visibility |
| Abnormal Point Cloud | Filter by Point Cloud point count, filter by average Point Cloud distance |
| Overlap or occlusion | Filter instances with overlapping bounding boxes, filter by mask area to bounding box area ratio |
| Missed detections in the top layer | Check whether all top-layer instances have been detected |
Tuning principles
- First determine the criterion that distinguishes abnormal instances.
- Add or adjust only one filtering condition at a time so you can identify which parameter caused a valid instance to be removed.
- Start with a permissive Threshold and tighten it gradually.
- After each adjustment, check both whether abnormal instances are filtered and whether valid instances are removed by mistake.
Instance Filtering Functions
The functions below follow the order of the function list in PickWiz. 【大师】 denotes an expert-level function in the software; these functions remain in their original positions below.
Related Documents
Configure instance recognition and segmentation results
Set the processing order of filtered instances
Generate the Point Cloud required for subsequent 3D calculations