Pick Point Adjustment Function Configuration Guide
About 6133 wordsAbout 20 min
Pick point adjustment functions correct the direction, position, and center of a pick pose so that the resulting pose meets constraints imposed by the robot configuration, end-effector, bin space, and target surface features.
Adjustment order
First, confirm the coordinate system of the pick point. Then select the axis to adjust and the target direction. Enable or modify one function at a time and observe how the pose axes change. Once the direction is correct, adjust the angle, translation distance, or search range.
Select a Pick Point Adjustment Function
| Adjustment goal | Recommended function | When to use it |
|---|---|---|
| Align a pose axis with or against a target axis | Rotate Pose to Align Rotation Axis Direction with Target Axis Direction | Rotate once around a fixed axis to align the direction with the target axis. |
| Keep a pose within an allowed angle range | Rotate Pose When Outside Angle Range | Use during depalletizing to prevent the end-effector from repeatedly rotating 180°. |
| Obtain a smaller angle with one flip | Flip Pose to Minimize Angle Between Rotation Axis and Target Axis | Make the angle between the rotation axis and the ROI target axis acute. |
| Point a pose axis toward the ROI center | Point Pose Axis Toward ROI Center | Adjust the end-effector direction and reduce collision risk. |
| Move a pick pose along a specified axis | Translate Pose | Compensate for the pick position or avoid the bin. |
| Refine a pose using a target plane | Refine Pose by Plane Normal | Use for a target with a reference plane when its pose tilt has an error. |
| Select the smallest angle from four candidate rotations | Rotate Pose to Minimize Angle Between Rotation Axis and Target Axis | Evaluate 0°, 90°, 180°, and 270° in sequence. |
| Rotate by a fixed angle | Rotate Pose Around Fixed Axis | Use when the rotation axis and angle are known. |
| Order pick points by the angle between pose axes | Sort Pick Points by Inter-Axis Angle | Sort by the angle between a pick pose axis and the ROI target axis. |
| Compensate for a consistent offset through on-site teaching | Pick Point Teaching | Transform poses based on the offset between the vision pose and the taught pick pose. |
| Align the pose Z axis with the robot configuration | Rotate Pose to Align Z-Axis Direction with Target Coordinate System Z Axis | In depalletizing, determine the target direction from the four-axis or six-axis robot configuration. |
| Automatically compensate for the angle to a specified axis | [Expert] Rotate Pose to Automatically Compensate for an Excessive Pick Pose Angle to a Specified Axis | Automatically bring a pose angle outside the allowed range back within it. |
| Find the center of symmetry and optimize the pose | [Expert] Symmetry Center Pose Optimization | Use for a target with a symmetric instance mask and a reference plane or ROI 3D. |
Pick Point Adjustment Functions
Related Documents
Filter invalid pick points by collision, pose, ROI, and coordinate range before or after adjusting pick points.
Configure pick point priority and output order.
Configure the Target pose estimation method before generating and adjusting pick points.