Front-Back Identification (via Point Cloud Template) Usage Guide
About 1611 wordsAbout 5 min
Front-Back Identification (through Point Cloud template) can import the Point Cloud templates of the front and back of the Target to match and capture the front or back of the Target, and the Pick Point can be set for the front or back of the Target respectively. This article mainly introduces how to configure the front and back of the Target and adjust the related visual Parameters after turning on Front-Back Identification (through the Point Cloud template).
Front-Back Identification (via Point Cloud templates) applies to random picking of general and planar Targets; ordered and random loading and unloading of general and planar Targets; ordered loading and unloading of isolated planar Targets; positioning and assembly of planar Targets using only Point Cloud matching; and positioning and assembly of planar and general Targets.
Positive and negative template production: PickWiz’s Point Cloud template production function
使用指南/images/image.png)
Operation Guide
1. Face type Target
1.1 When the front and back sides of the Target in the actual Scene are quite different, check the Front-Back Identification (via Point Cloud template) function when creating a new project; if it is not checked when creating a new project, click Edit in the lower right corner of the Task information interface, then check Front-Back Identification (via Point Cloud template) and save.
使用指南/images/image-1.png)
使用指南/images/091aa850-e8d7-4e60-acc0-1e5717744b9a.jpeg)
1.2 Configure dual-template CAD in the Target interface. Upload the Target's point cloud file, point cloud file (reverse side), Visual Model, and custom key points.
使用指南/images/34e4a06e-fc7b-4f00-ac61-e5573129d41b.jpeg)
1.3 Set the Pick Point corresponding to the front and back templates respectively.
使用指南/images/image-14.png)
使用指南/images/image-15.png)
1.4 In Robot configuration, grab relevant information and check Pick Point Index
使用指南/images/efa3da44-6ce6-4279-87ca-dc59b47e8bd0.jpeg)
Notice
The Pick Pointid returned by Robot should correctly correspond to the positive and negative templates
使用指南/images/image-2.png)
使用指南/images/image-3.png)
2. Universal Target and the front and back of the Target are the same shape
Examples are as follows:
Front | Back |
|---|
2.1 Same as above1.1
2.2 Configure dual-template CAD in the Target interface. Upload the Target's point cloud file, point cloud file (reverse side), Visual Model, and custom key points.
PickWiz will match the general target based on the original template according to the key point situation. If the key point prediction is wrong, it will match the reverse direction. In this case, use the score comparison of the interleaved template to correct the error. The front and back templates cannot fit the front and back of the CAD, but must be modified to intersect with each other.
When the Target is of the same shape, the front and back templates need to be staggered with each other and on the same level. As shown below.
The following are the front and back templates of TargetPoint Cloud. The two templates need to be staggered on the same horizontal plane.
使用指南/images/image-10.png)
使用指南/images/image-11.png)
使用指南/images/image-12.png)
使用指南/images/image-13.png)
2.3 Set Pick Point
Click Add to set the Pick Point of the front and back templates, check the front and back attributes, and adjust the Pick Point positions of the front and back template Point Clouds according to the visualization window.
Both front and back templates need to set two Pick Points:
- The first Pick Point ensures that the correct Pick Point is output when the front template matches the front Target correctly;
- For the second Pick Point, when the Target is front, if the front template is incorrectly matched and the reverse template is inverted and matched successfully, the result can be output according to the reverse Pick Point and set according to the reverse Pick Point. The same goes for the opposite.
使用指南/images/image-4.png)
使用指南/images/image-5.png)
使用指南/images/image-6.png)
使用指南/images/image-7.png)
2.4 In Robot configuration, grab relevant information and check Pick Point index Same as above 1.4
Front
Back