Ordered Loading and Unloading of General Targets — Cylinders
About 729 wordsAbout 2 min
1. Overview
Using neatly arranged cylinders as an example, this case explains how to set up an ordered loading and unloading task for general targets in PickWiz, covering instance recognition, pose estimation, Pick Point generation, and robot integration validation.
The case follows the complete workflow from preparation to acceptance. It focuses on coordinate consistency among the normalized mesh, keypoints, and point cloud template, as well as cylinder pick orientation, instance sorting, and matching validation. Common operations such as camera connection, robot communication, and eye–hand calibration are limited to key checks, with detailed steps linked to existing guides.
Applicability
This case uses the general pose estimation workflow based on CAD and a keypoint model. It is different from ordered loading and unloading based on cylinders. See Scenario and preconfiguration checks for the applicability conditions.
1.1 Configuration workflow
Check prerequisites and create the task
Configure the template and Target
Validate visual parameters
Run and accept
Optimize as needed
1.2 Chapter navigation
- Scenario and preconfiguration checks: confirm applicability, expected results, and model, hardware, and integration requirements.
- Create the task and basic configuration: create the task and associate equipment, calibration, and ROI configurations.
- Point cloud template and Target configuration: prepare the normalized mesh, keypoints, point cloud template, and visual model; then set the Target Pick Points.
- Visual parameter configuration: validate instance recognition, point cloud generation, sorting, pose estimation, and Pick Point filtering in sequence.
- Run and acceptance: validate with fixed historical samples and live capture, then accept low-speed robot integration and abnormal scenarios.
- Common requirements and troubleshooting: address sorting, multiple picks per capture, and cycle time; locate missed instances, incorrect poses, and filtered Pick Points.
1.3 Relationship among configuration assets
| Asset | Role in this case | Key checks |
|---|---|---|
| Normalized mesh | Provides Target geometry and a common coordinate reference for training and template creation | Matches the actual cylinder; dimensions and units are correct |
| Keypoint file | Used for coarse matching with the instance keypoints predicted by the model | Paired with the mesh and keypoint configuration used in training |
| Point cloud template | Provides visible geometry for pose matching and Pick Point setup | Aligned with the mesh; excludes background and adjacent cylinders |
| Visual model | Recognizes instances and supplies predictions for general pose estimation | Matches the actual cylinder, incoming arrangement, and training configuration |
| Target Pick Point | Defines the tool's pick position and orientation relative to the cylinder | Transforms correctly with the Target pose and meets the actual TCP and process requirements |
Do not substitute similar-looking models, keypoints, or templates from different sources for the paired assets. Identical file names do not prove that their coordinate relationships match.
Related documents
- Point cloud template creation guide: mesh normalization, keypoint creation, template generation, and point cloud alignment.
- Target configuration guide: Target fields, visual model, and Pick Point configuration.
- One-click training guide: CAD-based visual model training.
- General pose estimation configuration guide: keypoint coarse matching and point cloud fine matching.
- Visual computation configuration guide: input data, storage, pose count, and picking logic.
- Historical data guide: reproduce and compare results using historical samples.