KINGFISHER Series Camera Hardware Installation Manual
About 1492 wordsAbout 5 min
Welcome to DexForce products!
This manual guides you from unpacking and inspection through hardware installation. Illustrations are for reference only; the actual product shall prevail.
1. Unpacking inspection
After receiving the package, confirm that it is intact and undamaged. Check the product and accessories against the packing list, and promptly confirm that no items are missing or damaged.
1.1 Accessories
Important
The following list is for reference only. Accessories may vary by camera model. Refer to the packing list included with the actual product.

| No. | Item | Quantity | Notes |
|---|---|---|---|
| 1 | Calibration board | 1 | - |
| 2 | Standard Ethernet cable | 1 | Selected according to the camera model |
| 3 | Camera mounting backplate | 1 | Includes four M4 screws; provide the fasteners for the on-site equipment and two M8 bolts and nuts |
| 4 | USB dongle | 1 | - |
| 5 | Circular-connector Ethernet cable | 1 or 2 | Selected according to the camera model |
| 6 | Network switch | 1 | Includes a power cable; selected according to the camera model |
| 7 | Wired keyboard and mouse | 1 set | - |
| 8 | Product certificate | 1 | - |
| 9 | Camera | 1 | - |
| 10 | Industrial PC | 1 | Includes a power cable, mounting screws, product certificate, network antennas, and other accessories |
| 11 | Monitor | 1 | Includes a power cable and HDMI cable |
2. Hardware installation preparation
2.1 Tools and equipment to provide
| M4 hex key | M8 bolts, nuts, and matching tools | Ladder and safety equipment |
|---|---|---|
![]() | ![]() | ![]() |
| 1 | 2 | Prepare as required at the site |
2.2 Precautions
Make sure the camera operating environment meets the following conditions:
- Power is available and a Gigabit Ethernet network is provided.
- Temperature, humidity, impact, and other environmental conditions comply with the camera specifications.
- Ventilation and heat dissipation are adequate. Do not use the camera in a completely enclosed space, such as a sealed protective enclosure.
- The distance from the camera to the target surface is within the recommended working-distance range.
- Plan the robot path and take other appropriate measures to prevent collisions between the camera and surrounding equipment.
3. Hardware overview
| Device | Ports and indicators |
|---|---|
KINGFISHER-S-602![]() | ① Camera Ethernet port: Connect to the switch using a circular-connector Ethernet cable. ② LAN indicator:
|
KINGFISHER-W-3003![]() | ① Camera Ethernet port: Connect to the switch using a circular-connector Ethernet cable. |
KINGFISHER-S-1001![]() | ① Camera Ethernet port: Connect to the switch using a circular-connector Ethernet cable. |
Industrial PC![]() | ① Power connector and switch: Connect the industrial PC power cable and control its power. ② Ethernet ports: Use a standard Ethernet cable for the local Gigabit Ethernet network or to connect the switch. ③ HDMI port: Standard HDMI port. ④ DP port: Connect the monitor using its supplied HDMI cable (recommended). ⑤ USB ports: Connect the USB dongle, mouse, keyboard, and other peripherals. |
PoE switch (if supplied)![]() | ① UPLINK port: Connect to the industrial PC using a standard Ethernet cable. ② PoE ports: Connect one or two circular-connector Ethernet cables to the camera Ethernet ports. ③ PWR indicator:
|
4. Hardware installation
| Robot-end mounting | Fixed-bracket mounting |
|---|---|
![]() | ![]() |
| The camera moves with the robot. | The camera remains fixed on the bracket. |
Warning
- When the camera is mounted on a robot arm or another moving device, securely fasten its Ethernet and other cables to prevent pulling forces from damaging the cables or connectors.
- When the camera is mounted on a bracket, make sure the long edge of the camera field of view is parallel to the long edge of the pallet or bin. This keeps the top layer of the stack within the effective field of view.
4.1 Attach the camera mounting backplate
Use four M4 hex-socket screws to attach the mounting backplate to the rear of the camera. The two elongated slots in the backplate must be vertical relative to the rear panel. Then use two M8 bolts (not supplied) to mount the camera and backplate assembly on the robot end flange or camera mounting bracket.

4.2 Connect the camera to the switch
4.2.1 Single-port models
This applies to models such as KINGFISHER-S-602. Use one circular-connector Ethernet cable to connect the camera Ethernet port to a PoE port on the switch. Align the connector's raised key with the notch in the camera Ethernet port before inserting it, then insert the RJ45 connector into the switch PoE port.

Warning
Tighten the camera Ethernet connector screws. A loose connector may accelerate port wear or cause poor contact.
4.2.2 Dual-port models
This applies to models such as KINGFISHER-W-3003 and KINGFISHER-S-1001. Use two circular-connector Ethernet cables to connect the camera Ethernet ports to PoE ports on the switch. Align each connector's raised key with the notch in its camera Ethernet port before inserting it, then insert the RJ45 connectors into the switch PoE ports.

Warning
Tighten the camera Ethernet connector screws. A loose connector may accelerate port wear or cause poor contact.
4.3 Connect the switch to the industrial PC
Use a standard Ethernet cable to connect the switch to the industrial PC. Connect one end to the switch UPLINK port and the other end to an Ethernet port on the industrial PC.

4.4 Check the connections
Verify that all devices are connected correctly and all cables are securely fastened without being pulled or strained.
| Single-port model | Dual-port model |
|---|---|
![]() | ![]() |
Then turn on the power. The switch PWR indicator should be steady amber, the LINK/ACT indicator at the upper left of each connected port should be steady amber, and the PoE indicator at the upper right should be steady green. The camera LAN indicator, if present, should flash green, and the 1000M indicator, if present, should be steady green.
| Camera indicators | Switch indicators |
|---|---|
![]() | ![]() |
4.5 Installation complete
The camera hardware installation and connection are complete.













