Scenario Description and Pre-configuration Checks
About 967 wordsAbout 3 min
2. Scenario Description and Pre-configuration Checks
2.1 Scenario and Scope of Application
This case uses a distinctive rigid structure on an aluminum ingot as the positioning feature. It determines the pose by matching the template point cloud with the on-site point cloud, then transforms the marking positioning point defined on the template to the current target position.
The applicable conditions include:
- Each positioning task handles only one target, and the ROI can contain all of that target’s valid features.
- Changes in the incoming ingot’s position and pose are constrained, and the features remain consistently visible within the permitted range of variation.
- The relative relationship between the selected features and the actual marking position remains consistent.
- The camera can capture a 3D point cloud sufficient to distinguish position and orientation.
Similar-looking aluminum ingots do not necessarily share a usable template. If changes in the model, mold, or structure alter the relationship between the features and the marking position, recreate or check the template and positioning point.
Point Cloud Matching Only
This case selects “Positioned Assembly > Plane type Target positioned assembly (only Point Cloud matches).” The 2D image can be used to observe the site and check image capture, but 2D Instance Segmentation, masks, and bounding box results are not used to identify the target.
For guidance on selecting a solution, see Introduction to 3D Vision Guidance Solutions and Create an Empty Project.
2.2 Confirm Positioning Features and Marking Requirements
- Define the area to be marked, the allowable position deviation, and the orientation requirements.
- Look for geometric structures with stable relative positions near that area, such as actual edges, steps, grooves, or structural intersections.
- Check whether the features resemble those at other positions on the same aluminum ingot or on adjacent ingots, to avoid matching the wrong area.
- Confirm that the structure is consistent across different incoming samples, and check whether surface defects, reflections, or occlusion could affect the features.
- Define the marking tool TCP, approach direction, and working distance, and agree on which configuration will account for the offset.
A single flat area without boundaries or variations in height may be unable to constrain position and rotation within the plane. Prefer a distinctive combination of structures over simply selecting the area that looks flattest.
2.3 Check the Camera and Capture Conditions
- The camera, industrial PC, and related equipment are correctly connected and powered, and can capture point clouds reliably.
- The working distance and field of view meet the selected camera’s requirements, and the positioning features are placed, where possible, in an area with good imaging quality.
- Reflections from the aluminum ingot surface do not cause large portions of critical contours to be missing, stray points, or depth anomalies.
- The camera and lighting are mounted securely, and the target is stationary during capture.
- If the camera moves with the Robot, it can repeatedly reach the established capture position, and the Robot Pose used during capture corresponds to the image.
The original reference procedure uses a structured-light camera as an example. Configure the actual camera according to the field of view, distance, surface, and accuracy requirements; do not apply fixed exposure parameters to every aluminum ingot. For instructions, see Camera Connection and Parameter Adjustment Guide,
2.4 Check Communication, Tool, and Calibration
- The communication protocol, connection role, number of Robot axes, rotation expression, and coordinate settings are consistent.
- The tool TCP corresponds to the actual marking tool, rather than an unchecked fixture center or Robot flange origin.
- Eye-hand calibration has been completed according to how the camera is mounted, and the actual positioning error has been verified.
- The equipment responses to success, no target, matching failure, and data anomalies have been defined.
- Low-speed, single-step debugging with marking triggers disabled is available, so positioning can be verified before process actions are enabled.
For related procedures, see the Robot Configuration Guide, End-effector Configuration Guide, and Calibration Result Inspection and Analysis.
2.5 Expected Results for This Case
- The template matches the correct features on the specified aluminum ingot without shifting to another repeated structure.
- Position and orientation remain stable across the permitted variation in incoming ingots, and the marking positioning point changes correctly with the target pose.
- When no ingot is present, features are incomplete, or a result falls outside the permitted range, no marking action is performed without confirmation.
- The measured positioning error, actual marking position, and time required meet the requirements agreed on at the site.
Accuracy, working distance, and the number of samples for acceptance depend on the specific process. This case does not provide pass criteria that can be applied directly.
Back to Case Overview · Next Chapter: Create a Task and Configure the Basics